Forum Post: RE: ERROR: Netlister: unable to descend into any of the views defined in the view list

If you have Verilog views (i.e. digital Verilog) then you'd have to use a mixed-signal simulator. I would suggest you use "ams" as the simulator (you'll need an INCISIVE release installed), i.e. AMS Designer. spectreVerilog is dead; it's an ancient mixed-signal simulator which used Verilog-XL (which only supports Verilog-1995) and has actually finally been removed in IC617. So I would not recommend using it for anything new. Andrew.