I agree this feature is missing; One "bad" solution: for such component, you can create ine symbol per cofiguration, say 1.6 tjicknes or 2.4mm thickness pcb. Let thelm heave same name and put them in diffrent directory. Exemple: mylib/pcb/packages/pcb/1mm6_thick and mylib/packages/pcb/2mm4_thick Then you have to set the correct psmpath for each project. Not a good solution (it is prettydangerous since component may be modified/corrected and not the similar one for other thickness; you may point to wrong path,...) but actually it will work. If you have mutliple thickness on same pcb, this will not work. In such case i think the actual tool can not handle it. To Cadence team: maybe add the possibility to define a negative value to PLACE_BOUDARY_TOP? Jean-Charles
↧