SIMERROR: Error found by spectre during circuit read-in. ERROR (SFE-874): "/scratch/ak106252/simulation/aa96_sim/AK_TB_qw_tb_VGX_OCP_10uA/maestro/results/maestro/Interactive.37/1/aa96_sim_qw_tb_VGX_OCP_1/netlist/stimuli/dyn_floating_node.scs" 2: Cannot run the simulation because syntax error `Unexpected equals "="' was encountered at line 2, column 8. Correct the syntax error and rerun the simulation. dyn_floating_node.scs: myfnccheck dyn_float_tran_stat \ domains = VDD00 AGND \ ping_count = 300 \ ping_start = \[20u\] ping_duration =10u \ ping_resistor_min =10M \ ping_resistor_max =10G \ seed =1154 \ save =ping \ ping_ibias=100n \ ping_iabsthresh =500n \ ping_iabsthresh_ramp =1u \ ping_irelthresh =10000 \ xsubckt = \[V5ISO_SVT_TIELC V5ISO_SVT_TIELC\] //* parameters Vdd_check_float=3.3 time_check_float=0.5e-3 time_check_Jmax_float =50e-9 Vgg_check_float=2 Vgg1p5_check_float=2 time_check_float_soa=5e-3 parameters iss_check_float=100n //* check options dochecklimit=yes check options gmin_start=1 check options gmin_converge=1e-15 check options gmin=0 //* ifloat_chk0_nch_svt_iso_5p0v assert subs=nch_svt_iso_5p0v expr="i(s)" max=iss_check_float min=-iss_check_float level=error anal_types=\[tran\] duration=time_check_float message="### Floating Violation by icheck ###" ifloat_chk1_nch_svt_iso_5p0v assert subs=nch_svt_iso_5p0v expr="i(s)" max=iss_check_float min=-iss_check_float level=error anal_types=\[dc ac\] duration=time_check_float message="### Floating Violation by icheck ###" vfloat_chk0_nch_svt_iso_5p0v assert subs=nch_svt_iso_5p0v expr="Floating check condition; ( V(g,s) 0.1 && V(s) 0.1 && V(d) 0.1 && V(s) 0.1 && V(d) 0.1 && V(s) 0.1 && V(d) -3.2 && V(s)>3.2 )" duration=time_check_float message="### Floating Violation by vcheck ###" vfloat_chk1_pch_svt_iso_5p0v assert subs=pch_svt_iso_5p0v expr="Floating check condition; ( V(g,d) -3.2 && V(d)>3.2 )" duration=time_check_float message="### Floating Violation by vcheck ###" //* ifloat_chk0_pch_lvt_pm_iso_5p0v assert subs=pch_lvt_pm_iso_5p0v expr="i(s)" max=iss_check_float min=-iss_check_float level=error anal_types=\[tran\] duration=time_check_float message="### Floating Violation by icheck ###" ifloat_chk1_pch_lvt_pm_iso_5p0v assert subs=pch_lvt_pm_iso_5p0v expr="i(s)" max=iss_check_float min=-iss_check_float level=error anal_types=\[dc ac\] duration=time_check_float message="### Floating Violation by icheck ###" vfloat_chk0_pch_lvt_pm_iso_5p0v assert subs=pch_lvt_pm_iso_5p0v expr="Floating check condition; ( V(g,s) -3.2 && V(s)>3.2 )" duration=time_check_float message="### Floating Violation by vcheck ###" vfloat_chk1_pch_lvt_pm_iso_5p0v assert subs=pch_lvt_pm_iso_5p0v expr="Floating check condition; ( V(g,d) -3.2 && V(d)>3.2 )" duration=time_check_float message="### Floating Violation by vcheck ###" //* ifloat_chk0_pch_xs_iso_5p0v assert subs=pch_xs_iso_5p0v expr="i(s)" max=iss_check_float min=-iss_check_float level=error anal_types=\[tran\] duration=time_check_float message="### Floating Violation by icheck ###" ifloat_chk1_pch_xs_iso_5p0v assert subs=pch_xs_iso_5p0v expr="i(s)" max=iss_check_float min=-iss_check_float level=error anal_types=\[dc ac\] duration=time_check_float message="### Floating Violation by icheck ###" vfloat_chk0_pch_xs_iso_5p0v assert subs=pch_xs_iso_5p0v expr="Floating check condition; ( V(g,s) -3.2 && V(s)>3.2 )" duration=time_check_float message="### Floating Violation by vcheck ###" vfloat_chk1_pch_xs_iso_5p0v assert subs=pch_xs_iso_5p0v expr="Floating check condition; ( V(g,d) -3.2 && V(d)>3.2 )" duration=time_check_float message="### Floating Violation by vcheck ###" //* ifloat_chk0_nch_svt_iso_5p0vC assert subs=nch_svt_iso_5p0vC expr="i(s)" max=iss_check_float min=-iss_check_float level=error anal_types=\[tran\] duration=time_check_float message="### Floating Violation by icheck ###" ifloat_chk1_nch_svt_iso_5p0vC assert subs=nch_svt_iso_5p0vC expr="i(s)" max=iss_check_float min=-iss_check_float level=error anal_types=\[dc ac\] duration=time_check_float message="### Floating Violation by icheck ###" vfloat_chk0_nch_svt_iso_5p0vC assert subs=nch_svt_iso_5p0vC expr="Floating check condition; ( V(g,s) 0.1 && V(s) 0.1 && V(d) 0.1 && V(s) 0.1 && V(d) 0.1 && V(s) 0.1 && V(d) -3.2 && V(s)>3.2 )" duration=time_check_float message="### Floating Violation by vcheck ###" vfloat_chk1_pch_svt_iso_5p0vC assert subs=pch_svt_iso_5p0vC expr="Floating check condition; ( V(g,d) -3.2 && V(d)>3.2 )" duration=time_check_float message="### Floating Violation by vcheck ###" //* ifloat_chk0_pch_lvt_pm_iso_5p0vC assert subs=pch_lvt_pm_iso_5p0v expr="i(s)" max=iss_check_float min=-iss_check_float level=error anal_types=\[tran\] duration=time_check_float message="### Floating Violation by icheck ###" ifloat_chk1_pch_lvt_pm_iso_5p0vC assert subs=pch_lvt_pm_iso_5p0v expr="i(s)" max=iss_check_float min=-iss_check_float level=error anal_types=\[dc ac\] duration=time_check_float message="### Floating Violation by icheck ###" vfloat_chk0_pch_lvt_pm_iso_5p0vC assert subs=pch_lvt_pm_iso_5p0v expr="Floating check condition; ( V(g,s) -3.2 && V(s)>3.2 )" duration=time_check_float message="### Floating Violation by vcheck ###" vfloat_chk1_pch_lvt_pm_iso_5p0vC assert subs=pch_lvt_pm_iso_5p0v expr="Floating check condition; ( V(g,d) -3.2 && V(d)>3.2 )" duration=time_check_float message="### Floating Violation by vcheck ###" //* ifloat_chk0_pch_xs_iso_5p0vC assert subs=pch_xs_iso_5p0v expr="i(s)" max=iss_check_float min=-iss_check_float level=error anal_types=\[tran\] duration=time_check_float message="### Floating Violation by icheck ###" ifloat_chk1_pch_xs_iso_5p0vC assert subs=pch_xs_iso_5p0v expr="i(s)" max=iss_check_float min=-iss_check_float level=error anal_types=\[dc ac\] duration=time_check_float message="### Floating Violation by icheck ###" vfloat_chk0_pch_xs_iso_5p0vC assert subs=pch_xs_iso_5p0v expr="Floating check condition; ( V(g,s) -3.2 && V(s)>3.2 )" duration=time_check_float message="### Floating Violation by vcheck ###" vfloat_chk1_pch_xs_iso_5p0vC assert subs=pch_xs_iso_5p0v expr="Floating check condition; ( V(g,d) -3.2 && V(d)>3.2 )" duration=time_check_float message="### Floating Violation by vcheck ###" //* ifloat_chk0_pch_svt_iso_dpw_5p0v assert subs=pch_svt_iso_dpw_5p0v expr="i(s)" max=iss_check_float min=-iss_check_float level=error anal_types=\[tran\] duration=time_check_float message="### Floating Violation by icheck ###" ifloat_chk1_pch_svt_iso_dpw_5p0v assert subs=pch_svt_iso_dpw_5p0v expr="i(s)" max=iss_check_float min=-iss_check_float level=error anal_types=\[dc ac\] duration=time_check_float message="### Floating Violation by icheck ###" vfloat_chk0_pch_svt_iso_dpw_5p0v assert subs=pch_svt_iso_dpw_5p0v expr="Floating check condition; ( V(g,s) -3.2 && V(s)>3.2 )" duration=time_check_float message="### Floating Violation by vcheck ###" vfloat_chk1_pch_svt_iso_dpw_5p0v assert subs=pch_svt_iso_dpw_5p0v expr="Floating check condition; ( V(g,d) -3.2 && V(d)>3.2 )" duration=time_check_float message="### Floating Violation by vcheck ###" //* ifloat_chk0_nch_ldm_iso_5v assert subs=nch_ldm_iso_5v expr="i(s)" max=iss_check_float min=-iss_check_float level=error anal_types=\[tran\] duration=time_check_float message="### Floating Violation by icheck ###" ifloat_chk1_nch_ldm_iso_5v assert subs=nch_ldm_iso_5v expr="i(s)" max=iss_check_float min=-iss_check_float level=error anal_types=\[dc ac\] duration=time_check_float message="### Floating Violation by icheck ###" vfloat_chk0_nch_ldm_iso_5v assert subs=nch_ldm_iso_5v expr="Floating check condition; ( V(g,s) 0.1 && V(s) 0.1 && V(d) -3.2 && V(s)>3.2 )" duration=time_check_float message="### Floating Violation by vcheck ###" vfloat_chk1_pch_ldm_n_5v assert subs=pch_ldm_n_5v expr="Floating check condition; ( V(g,d) -3.2 && V(d)>3.2 )" duration=time_check_float message="### Floating Violation by vcheck ###" //* *ping_count: Number of statistical periods being used. Default is 300. *ping_start: Time at which the check is initiated. *ping_duration: Duration of a ping. A ping consists of two phases: high/low forcing phase and ramp up forcing phase. Length of each phase is half of ping_duration. Default is none. *seed: Seed for random number generation. *ping_ibias: Lowest bias current in the design. It is recommended to set this parameter to 10% of bias current in the design. Default is none. If specified, then ping_resistor is evaluated to be equal to: *ping_resistor=domain_voltage/ping_ibias. *ping_iabsthres: Current threshold for floating node detection during high/low forcing. Default is domain_voltage/ping_resistor. *ping_iabsthresh_ramp: Current threshold for floating node detection during ramp forcing. Default is 100*domain_voltage/ping_resistor. *ping_irelthresh: Relative threshold for floating node detection for both high/low and ramp forcing. Default is 1000. *save=: To probe gate voltage of MOSFETs, base voltage of BJTs, drain current of MOSFETs and collector current of BJTs. When value is set to ping or all, a new waveform file will be written in raw directory. The format of this new waveform file will be _ .tran.tran, where is the name of check statement and is the time specified in ping_start parameter. The waveform will start from PingStart until ping simulation is finished. If save=ping, only save ping voltages and mos/bjt currents. If save=all, both of signals in the save=ping and the ones saved in the netlist are saved. Default is no. Possible values are ping, no and all. *omain_detection_method=dev Domain detection, find the ping nodes through device or node. Possible values are dev and node. *dyn_float_tran_stat Algorithm *Transient simulation is run till ping_start. *Qualified nodes are identified to exercise pings according to domains. *For each qualified node, domain_voltage is evaluated. *Pings are created randomly using seed value. One third of the qualified nodes are selected for HIGH. One third of qualified nodes are selected for LOW. One third of qualified nodes are selected for RAMP. *ping_duration and ping_resistor are evaluated *Pings are applied sequentially at ping_start. *For each ping: * All MOSFET drain currents and BJT collector currents are stored as reference current (Iref) right before applying the ping *For the first half of ping_duration: * HIGH/LOW to each node is forced through a resistor with ping_resistor value. * Device current (Iping) is checked at 0.95 of 0.5*ping_duration. A fail is detected if: * |Iref-Iping| > max(pingibsthresh, pingirelthresh * min(|Iref|,|Iping|)) *For the second half of ping_duration: *The RAMP is forced to each node through a resistor with the ping_resistor value and the maximum (Iping,max) and minimum (Iping,min) device current is checked during the RAMP. A fail is detected in any of the following cases: * |Iref-Iping,max| > max(pingiabsthresh_ramp, pingirelthresh*min(|Iref|,|Iping,max|)) * |Iref-Iping,min| > max(pingiabsthresh_ramp, pingirelthresh*min(|Iref|,|Iping,min|)) *The results are written to the dynamic.xml file, which can be viewed in a Web browser. This design check is supported only in Spectre and Spectre APS modes. It is not supported in Spectre XPS FastSPICE, Spectre XPS SPICE, and Spectre MS modes. //op1 options stahiz_ping_all=yes I am not sure how to resolve this error. Need help.
↧