Forum Post: RE: update Part number for all symbols in schematic
OK this works good, but i need to change different values at a time like entire sheet, this step works only each value or part number.
View ArticleForum Post: ADE XL simulation efficiency and errors
Hi My version of Virtuoso is 6.1.7-64b 07/10/2018. I share a server with others. When I use ADE XL to simulate PVT, I always encounter a simulation error; the output log shows: 'failed to create...
View ArticleForum Post: XCELIUM: cannot find command dumptcf
Hi all, I have installed XCELIUM 23.03. I find some things that are not working properly. First of all, if I launch the script available in the scripts folder, when I try to run the application, I...
View ArticleForum Post: Matching Differential impedance (Balanced) to a 50 Ω single ended
nRF24L01+ transceiver IC has a balanced output for antenna and it's recommended to load it with 15+j88 Ω to get maximum power. I tried to re-simulate the circuit but it didn't work. I doubt the setup...
View ArticleForum Post: RE: Is there a reverse function of...
In terms of efficiency it's unlikely to make any noticeable difference - I'd probably default to the first approach unless I needed the ability to change the behaviour during the session (as you said)....
View ArticleForum Post: Color Palette
When we import color palette from another design, does it work only if there's same stack-up?. And what's difference between importing .param and .col file to import color palette? -Thank you
View ArticleForum Post: FineTurbo: Solver gets stuck
I am using FineTurbo 18, and when I put in a simulation, most of the time, it gets stuck on this: BLOCK 47 : Transfer initial solution for turbomachinery BLOCK 4 : Transfer initial solution for...
View ArticleForum Post: RE: Color Palette
On the color palette it is not related to the stackup. The color palette only pertains to the selection of available colors that you can use to assign a color to an object. That would be the "Available...
View ArticleForum Post: RE: PNoise Infinite flicker noise message
Hi Frank, Thank you very much for your help. I appreciate it. Please see below for what I noticed in the output log: Since I don't know why I cannot post screen shots, I will simply type the message...
View ArticleForum Post: RE: function for thermometric code from digital bus
I have tried using awvDigital2Analog, unfortunately such function seems to convert the bus to an analog voltage taking its value as if it were an unsigned decimal, whereas most of the times I am using...
View ArticleForum Post: RE: function for thermometric code from digital bus
awvDigital2Analog has e.g. arguments ?mode and ?outWaveType to determine the type of the output, please look up the corresponding values in the manual that fit your requirements. Further, the veriloga...
View ArticleForum Post: RE: ADE XL simulation efficiency and errors
hello,anyone know how to achieve it
View ArticleForum Post: RE: In Win11 24H2 OS, Allegro X Capture23.1 HF006 has issues with...
I can also report that I am having this issue,too. Windows 24H2。
View ArticleForum Post: RE: Failure getting SUL "Too many machines..."
Hi MLaabs, Regarding error resolution, please refer to the following COS article for a solution: Article (20509601) Title: Failure getting SUL: Too many machines attempting to connect with the same...
View ArticleForum Post: RE: DRC rule deck writing
Hi, Robman, How can I highlight the edges without error name, similar to the edges what you flagged here in the first picture case. How can I hide error name? and only highlight error region.
View ArticleForum Post: Alegro X System Capture Smart PDF Does Not Print Attribute
Hi, I'm new to version 23.1 of Allegro X system capture. I'm printing a PDF using the smart PDF tool. But, when clicking on components in the exported PDF i see an empty attribute pop-out. Appreciate...
View ArticleForum Post: RE: DRC rule deck writing
Sorry, I don't fully understand this question: The code I suggested will result in picture 1. exte layer1 layer 2 -eq 2.0 -output negative1;
View ArticleForum Post: RE: DRC rule deck writing
Sorry for that, I wanted to customize the error markings, the error marking region in your picture 1 and error marking in my picture 1 is different right? I don't want the error name 'edge' in my error...
View ArticleForum Post: RE: DRC rule deck writing
The error is an 'edge' object: Output this as a temporary layer and use 'edge_expand' to derive a new error marker object.
View ArticleForum Post: [AMS][plotting internal signals in a "dspf" netlist]
hi all, I'm trying to plot some internal signals in a dspf netlist. ===== =============== problem definition ==================== For example, here is the hierarchy of my testbech, in which instance...
View Article