Forum Post: RE: Ignoring or avoiding "x" propagtaion for ams simulation for...
I've never used the -tcheck or -timing options (not sure they're appropriate here), so can't really comment on the feasibility of using something similar (without spending time doing research to try it...
View ArticleForum Post: RE: rise/fall time calculator result not in accordance with...
[quote user="Rakesh Honnavalli Prabhakara"] I looked through few posts and followed the procedure, but I am still not able to figure out the issue. Could it be a bug? should I go for developing SKILL...
View ArticleForum Post: RE: MMSIM Issue with IC5141
[quote user="Bilal Porto"]yes my only fear is change. I am at a very critical stage of my chip and don't want to risk it with a newer version with which i do not have much experience. [/quote] Although...
View ArticleForum Post: RE: MMSIM Issue with IC5141
what i meant is that iC6 looks a bit different. U know i feel a bit uncomfortable with tabs misplaced or some extra tabs which i don't know the meaning. but let me ask u one favour. which parasitic...
View ArticleForum Post: RE: PCell Instance inside PCell Callback Issues
Thank you, It would solve the problem for aelSuffixNotation, but some of the callbacks are also using aelNumber, aelEnvCreate, aelEnvSetGlobalList and aelEnvInterpret. Thinking outside the box here,...
View ArticleForum Post: RE: MMSIM Issue with IC5141
QRC can extract RLCK and is very capable in that area. Also, "U" is spelt "you" (there's no tax on characters in the forums - see the end of the forum guidelines - this is something that irritates me...
View ArticleForum Post: RE: skill code to change the direction of pin,and symbol of that...
For symbol pins, these are not normally instances - they're just a shape. So it would be sufficient to do: term=dbFindTermByName(cvId "termName") term~>direction="inputOutput" Regards, Andrew
View ArticleForum Post: RE: Using Sweeps with Additional Parameter option in Transient...
No, that's not possible.
View ArticleForum Post: RE: Harmonic Balance Analysis S-Parameter Impedance Data
I suggest (if you've not done so already) that you contact customer support . It's quite hard to understand precisely what you're doing here without seeing it, so that would we the best way of being...
View ArticleForum Post: RE: Getting Result '0' or nil from ocean script
You probably just need to use the netlist name - note that "G" won't work because that's a net name not a terminal name. I suspect you want: Cgd1=value(abs(imag((IF("source1:p") / (2 * 3.14159 * 1))))...
View ArticleForum Post: RE: unable to plot dB20
This might just be because of the extra unnecessary parentheses you have in the expression. SKILL has a problem if you use more than one set of matching parentheses as it confuses the parser (which can...
View ArticleForum Post: RE: Virtuoso: Comment Out
I finally got to replying to this - and was about to suggest the autoHilight switch, which you've found. For the bindkey, the only thing I can imagine is that the F7 bindkey has been superseded by...
View ArticleForum Post: RE: MMSIM Issue with IC5141
Thanks Andrew for your help and support. I am really sorry for my typo mistake. I guess that I paid less attention due to weekend and made this mistake. I am really sorry. Regards Bilal
View ArticleForum Post: RE: AMS Simulator in cadence virtuoso
Ok Thank you Andrew for the reply. I am using product version 15.1, virtuoso version IC 6.1.6. 64-b. 500.4. I came to know that DC sweep is not possible using AMS simulator in version 6.1.6, if this is...
View ArticleForum Post: RE: PCell Instance inside PCell Callback Issues
You wouldn't be able to get an instance (because nothing has been created, and you'd have to create an instance somewhere for this to work), but I don't think it's necessarily required. Using the code...
View ArticleForum Post: RE: AMS Simulator in cadence virtuoso
Tools->Parametric Analysis in ADE is probably your only choice (or similar variable sweeps isn ADE XL) in that case. Regards, Andrew.
View ArticleForum Post: RE: Import physical view doesn't include all pins.
Thanks for the tip. I will check the pin names.
View ArticleForum Post: ncverilog generate verilog netlist from schmatic
when I use ncverilog generate verilog netlist from schmatic, It does not generate the one that contained functional view. verilogSimStopList = '("verilog" "pld_verilog" "lai_verilog" "lmsi_verilog"...
View ArticleForum Post: RE: Using Sweeps with Additional Parameter option in Transient...
I got the impression that it wasn't possible, but thank you for confirming. In hindsight, listing out all the steps explicitly wasn't all that bad (especially if you only need to do it a few times)....
View Article