Forum Post: RE: Generating Live BOM in OrCAD X Capture CIS
Thanks Steve that was spot on now I can see the LiveBOM and thanks to your advice I have the relevant data for my parts
View ArticleForum Post: RE: How to freeze/unfreeze a dynamic shape
This is a partial static shape over dynamic shapes, correct?
View ArticleForum Post: hotfix released throughout the year 2023 for sigrity 2023...
hello Sir / Madam , for hotfix released throughout the year 2023 for sigrity 2023 , do i have to install all of them or can i just install the latest one ? thank you
View ArticleForum Post: RE: hotfix released throughout the year 2023 for sigrity 2023...
Hi CalvinTan, You can just install the latest hotfix for Sigrity 2023.1 available at downloads.cadence.com. Currently, the latest hotfix available is SIG23.10.300. You can also use Cadence Download...
View ArticleForum Post: RE: How to generate netlist without virtuoso
"The netlist file that you specify for the Spectre® circuit simulator interface with the design command must be netlist. The full path can be specified. For example, /usr/netlist is acceptable. The...
View ArticleForum Post: skill to create shape based on vias
Hi Attached, i want use skill to create a shape based on select via, but i can't wirte the skill. community.cadence.com/.../Create-Shape-based-on-via.mp4
View ArticleForum Post: RE: How to generate netlist without virtuoso
OK, it's not "Virtuoso" that is supporting the netlist; it's Spectre. So the netlist should be in Spectre syntax (ideally) although Spectre also supports SPICE syntax too (Spectre syntax is cleaner...
View ArticleForum Post: RE: Capture 17.4 Creating PNG Files on Every Save
Same issue here running 17.4-2019 S033. Has anyone been able to disable this feature?
View ArticleForum Post: Identify Orcad Schematic entry version
Good morning, I dug up an old project from 2005 and I should open the schematic to check some things. This is the schematic of a XILINX XC95108-pq160 CPLD which the XILINX ISE 6.1 software then...
View ArticleForum Post: How to identify old Orcad Schematic entry version
Good morning, I dug up an old project from 2005 and I should open the schematic to check some things. This is the schematic of a XILINX XC95108-pq160 CPLD which the XILINX ISE 6.1 software then...
View ArticleForum Post: Files extensions
Hi, Sorry if my post isn't in the right section. I took over a project from a closed company and I have some files and I don't know how to open them. I have four .art and one .drl. Can you help me?...
View ArticleForum Post: RE: Capture 17.4 Creating PNG Files on Every Save
17.4 S038 still cluttering up our EDM system with spurious image files.
View ArticleForum Post: RE: Time domain vs frequency domain uses?
Hi Yuva09, Broadly speaking, there are various sigrity point tools that are intended for Time domain and Frequency domain analysis. In each tool, there are different workflow items that are designed...
View ArticleForum Post: RE: Capture PDF Export Issue
17.4 S038 we also have this issue. And now I can't tell if there's a newer hotfix available because the downloads.cadence.com login prompt is utterly broken.
View ArticleForum Post: RE: Orcad Capture performance
Online DRC seems to be a huge performance killer when editing schematics. OrCAD gets worse every year.
View ArticleForum Post: RE: Files extensions
Anthony, I assume they are Gerber artwork/drill files. I would expect that you can open these in Allegro (maybe Orcad) and I think can be imported into Microwave Office. My question is what do you...
View ArticleForum Post: RE: Converting .MAX file to .BRD File issue
Hi BTerry, apologies for the late reply. I ended up moving the files into a folder with a proper structure and somehow that fixed the issue. It's possible that something in the previous folder was...
View ArticleForum Post: RE: Files extensions
I try to get as much information as possible on the project. And for these files, I try to get the PCB view.
View ArticleForum Post: RE: Capture 17.4 Creating PNG Files on Every Save
It seems to be a 'feature' to show a thumbnail of the design in the recent bar on the front page. Hopefully there's a way to disable it to stop the clutter.
View Article